|
Hardware Specifications |
|
Interface |
PoE Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel) |
|
※ IEEE 802.3af PoE PD Port |
|
LAN Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port |
|
RJ11 Port: Connect to the telephone through the 4-conductor phone line |
|
PoE |
802.3af PoE PD, Class 3 |
|
Antenna |
Built-in 3dBi antenna x 2 |
|
Reset Button |
Reset button at side panel |
|
(Press over 5 seconds to reset the device to factory default) |
|
LED Indicators |
PWR/SYS LED |
|
Material |
Plastic |
|
Dimensions (W x D x H) |
86 x 35 x 86 mm |
|
Weight |
76g |
|
Power Requirements |
802.3af/at PoE, 48-56V DC input, 0.35A (max.) |
|
Power Consumption |
< 10W |
|
Wireless interface Specifications |
|
Standard |
Compliance with IEEE 802.11b/g/n |
|
Frequency Band |
Europe -- ETSI: 2.412~2.472GHz |
|
Operating Channel |
Europe -- ETSI: 1~13 |
|
Channel Width |
20 or 20/40MHz |
|
Data Transmission Rates |
■ 802.11n (HT40): |
|
270/243/216/162/108/81/54/27Mbps |
|
135/121.5/108/81/54/40.5/27/13.5Mbps (dynamic) |
|
■ 802.11n (HT20): |
|
130/117/104/78/52/39/26/13Mbps |
|
65/58.5/52/39/26/19.5/13/6.5Mbps (dynamic) |
|
■ 802.11g: 54/48/36/24/18/12/9/6Mbps (dynamic) |
|
■ 802.11b: 11/5.5/2/1Mbps (dynamic) |
|
Transmission Distance |
802.11n: up to 70m |
|
802.11g: up to 30m |
|
The estimated transmission distance is based on the theory. |
|
The actual distance will vary in different environments. |
|
Max. RF Power |
802.11n: 17 ± 2dBm |
|
802.11g: 17 ± 2dBm |
|
802.11b: 18 ± 2dBm |
|
Receiver Sensitivity |
IEEE 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8% |
|
IEEE 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER <10% |
|
IEEE 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER <10% |
|
Data Rate |
IEEE 802.11b: 1/2/5.5/11Mbps |
|
IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps |
|
IEEE 802.11n: 300 Mbps in 40MHz mode/150Mbps in 20MHz mode |
|
TX Power |
Provides 5-level Tx Power Control (100%, 70%, 50%, 35%, 15%) |
|
Wireless Management Features |
|
Operation Mode |
■ Standalone AP |
|
■ Managed AP |
|
Wireless Mode |
■ AP (Multiple-SSIDs) |
|
■ Client |
|
■ Repeater (WDS+AP) |
|
■ Universal Repeater (AP+Client) |
|
■ WDS PtP Bridge |
|
■ WDS PtMP Bridge |
|
Encryption Security |
■ WEP (64-/128-bit) encryption security |
|
■ WPA/WPA2 (TKIP/AES) |
|
■ WPA-PSK/WPA2-PSK (TKIP/AES) |
|
■ 802.1x RADIUS Authentication |
|
Wireless Security |
Wireless MAC address filtering (up to 20 entries) |
|
Supports WPS (Wi-Fi Protected Setup) |
|
SSID broadcast and hide |
|
Wireless Advanced |
■ Supports WMM (Wi-Fi Multimedia) for better data transmission of video or |
|
on-line demand |
|
■ Supports wireless schedule |
|
■ Multiple SSIDs: up to 5 |
|
■ Wireless Isolation: Enables it to isolate each connected wireless client of |
|
a BSSID from communicating with each other |
|
■ IAPP (Inter Access Point Protocol): 802.11f wireless roaming |
|
■ Provides wireless statistics, max. associated station number |
|
Max. Supported Clients |
Wired: 253 |
|
2.4GHz Wireless: 32 |
|
LAN |
Built-in DHCP server supporting static IP address distribution |
|
Supports static IP and dynamic IP |
|
Supports UPnP |
|
Supports 802.1d Spanning Tree |
|
System Management |
Web-based (HTTP) management interface |
|
Supports SNTP synchronization |
|
Easy firmware upgrade via HTTP/TFTP (through AP controller) |
|
Easily locate deployed APs through the LED control |
|
Supports SNMP management, LED On/Off control, Schedule Reboot |
|
Supports Smart Discovery Utility, System Log |
|
Supports WAPC series of AP controllers for central management |
|
Max. WDS Peers |
8 |
|
IEEE Standards |
IEEE 802.11n (2T2R, up to 300Mbps) |
|
IEEE 802.11g |
|
IEEE 802.11b |
|
IEEE 802.11i |
|
IEEE 802.3 10BASE-T |
|
IEEE 802.3u 100BASE-TX |
|
IEEE 802.3x flow control |
|
Other Protocols and Standards |
CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP |
|
Environment & Certification |
|
Temperature |
Operating: -10 ~ 50 degrees C |
|
Storage: -40 ~ 70 degrees C |
|
Humidity |
Operating: 10 ~ 90% (non-condensing) |
|
Storage: 5 ~ 90% (non-condensing) |
|
Regulatory |
CE, RoHS |
